I had build a quad specially for racing.
I would like to try this new frame middle carbon middle aluminum.
Build this quad was easy and we don't have a lot off place but what you need go inside.
Frame |
DQuad Obsession V2
(11 builds)
Rotorgeeks.com
|
$104.99 |
Flight Controller |
KISS FC - 32bit Flight Controller V1.03
(179 builds)
Flyduino.net
|
$34.00 |
ESCs |
4 x KISS ESC 2-5S 24A race edition - 32bit brushless motor ctrl
(122 builds)
Flyduino.net
|
$88.00 |
Motors |
T-Motor F40 PRO 2600KV FPV Series Motor - Set of 4 Motors
Heli-nation.com
|
$99.60 |
Propellers |
RaceKraft 5051 5" Tri-Blade Prop - Smoke, Blue, Clear, Emerald
(123 builds)
Racedayquads.com
|
$3.99 |
FPV Camera |
RunCam Owl Plus
(8 builds)
Shop.runcam.com
|
$49.99 |
FPV Transmitter |
ImmersionRC TrampHV 5.8G Video Transmitter International Version
(4 builds)
Helidirect.com
|
$39.99 |
Antenna |
Lumenier AXII 5.8GHz Antenna (RHCP) (2pcs)
(199 builds)
Getfpv.com
|
$29.99 |
Receiver |
FrSky X4R-SB - 3/16 Channel Receiver with Sbus and CPPM
(176 builds)
Pirofliprc.com
|
$24.99 |
Batteries |
Tattu R-Line 1550mAh 95C 4S1P lipo battery pack with XT60
– MultiRotorMania
(49 builds)
Multirotormania.com
|
$36.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Nice build! Where did you get the 3D printed mount from?