Mockup

lightweight 6/7

By UpMostBeast FPV on Apr 01, 2020

0  14  0

targeting
frame 100g motors 4x41=164g camera 5g esc+fc 20g vtx 5g ant 5g receiver 5g gps 10g miscellaneous hardware and accessories 100g props 30g
dry weight of 450g
auw (runcam 5 and 1500mah 6s) 760

Part List

Frame

Hyperlite Floss 3.0 Long Range 7" Frame
Pyrodrone.com
$59.99

Flight Controller

AIKON 2020 Stack combo (6 builds)
Pyrodrone.com
$79.00

Motors

4 x RVS Churner 2208 1600/1750/2400kv Freestyle Motor
Rotorvillage.ca
$87.96

Propellers

Gemfan 7040-3 Tri-Blade Flash Series Prop - (2CW+2CCW)
Rotorvillage.ca
$5.29

Propellers

Gemfan 6042-3 Flash POPO Tri-Blade Prop - 2CW 2CCW
Rotorvillage.ca
$4.99

Propellers

Gemfan 7042-2 Flash Series Prop - 2CW 2CCW
Rotorvillage.ca
$4.99

Propellers

HQ 7X4X3 2CW+2CCW (4 builds)
Pyrodrone.com
$3.99

Propellers

DALPROP Cyclone T7056C Pro Props Long Range High Efficiency 2 Pairs (2 builds)
Pyrodrone.com
$3.79

Propellers

Azure Power 6145 BSP (Big Smooth Props) Tri-Blade 6" Prop 4 Pack
Pyrodrone.com
$3.49

FPV Camera

Foxeer 1200TVL 1/2" Sensor Micro Toothless FPV Camera M12 Lens (3 builds)
Pyrodrone.com
$34.90

FPV Transmitter

RUSH TANK MINI VTX 5.8G Smart Audio 20X20 (33 builds)
Pyrodrone.com
$37.99

Antenna

TrueRC Singularity 5.8 SMA Long Antenna RHCP
Pyrodrone.com
$19.99

Receiver

FRSKY R9 SLIM+ 915MHZ LONG RANGE RECEIVER
Pyrodrone.com
$19.99

Batteries

GNB 2200mAh 6S 120C LiPo XT60
Rotorvillage.ca
$66.99

Batteries

GNB 1300mAh 6S 110C LiPo XT60
Rotorvillage.ca
$51.99

3D Printed

TPU SMA Antenna mount for 31mm spaced frames Without RX antenna tube holes
Pyrodrone.com
$5.00

3D Printed

TPU Immortal Holder Floss 3.0/30L
Pyrodrone.com
$3.50

3D Printed

Hyperlite FLOSS 3.0 Session Mount (Choose Angle)
Pyrodrone.com
$15.00

Misc Parts

RUSH Ultra-small External Automatic Gain Control VTX Microphone
Pyrodrone.com
$3.99

Misc Parts

HGLRC M8N GPS GLONASS MODULE (5 builds)
Pyrodrone.com
$12.99

Misc Parts

Vifly Finder 2 Buzzer - Lost Drone Finder/Locater/Alarm (3 builds)
Pyrodrone.com
$12.99

Misc Parts

PYROLEDS 4-CHIP SUPER BRIGHT 4-6S LED
Pyrodrone.com
$1.99
Show stores (2)

Discussion

Sign in to comment

Guides & Reviews

27 1,925  27
21 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,784  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more