superlight toothick

By UpMostBeast FPV on Apr 04, 2020

0  7  0

picklepick 65mm frame (2mm thick not 2.5mm thick) with ledrone club nano 3 mount
estimated dry weight: 4.4+4*(2.8+0.4)+1.1+1.5+5+4+3=32g
estimated AUW with 2s 300mah: 54g
estimated AUW with 3s 300mah: 61g

Part List

Flight Controller

V2 Crazybee F4 1-3S Brushless Flight Controller, RX and ESC Combo (6 builds)


Happymodel EX1102 8500Kv Brushless Whoop/Micro Motor for Mobula7 HD (4 Pcs.)


HQ Micro Prop 65MM (5CW+5CCW)-Poly Carbonate-1.5MM Shaft (2 builds)


HQ Durable Prop T65MM (5CW+5CCW)-Poly Carbonate (15 builds)


Gemfan 65mm (1.5mm HUB) Bi-Blade Prop (4CW+4CCW)

FPV Camera

RunCam Nano3 FPV Camera

FPV Transmitter

NameLessRC Nano400 VTX - PIT/25/100/200/400mW


GNB 300mAh HV 3S 80C LiPo XT30 - HV4.35


GNB 300mAh HV 2S 80C LiPo XT30 - HV4.35

Misc Parts

NewBeeDrone BeeBrain V2 Camera Mount
Show stores (3)


Sign in to comment

Guides & Reviews

29 2,578  33
30 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,988  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more