This is a custom built 3" toothpick based on the GTB frames from diatone.

I LOVE this quad! It is one of my favortite quads to fly, it is so quiet, agile and can fly nearly anywhere! and best of it all.. it has great flight times!

I bought the 3s version (4 mm) of the frame just because i crash a lot xD However, i wanted to be able to use my 2s 450 whoop batteries so i only use it for 2s. You can save roughly 3-4g by using the 3 mm version of the frame. My pod is also almost 1g heavyer than the stock GTB pod, but it is also 1,6 mm thick and protects everything really well. There is a little bit of prop in view when flying 5-20 degrees. Above 20 degrees the props disapear.

The CAP is not really doing much flight-whise on 2s, but it does clean up the video significantly!

These Buzzers are the most disapointing thing i have ever bought in the FPV world.. Using the motors as buzzer is louder...

Build details:
-Motors are 7500 Kv - i am dreaming of the new flywoo 1204 8000kv motors... :/
-Flight time (2S 450); 4-5 min of park fun
-Flight time (2S 550); xx min of park fun
-Frame weight: Roughly 22g
-Dry weight: 64g
-AUW (2S 450): 92g
-AUW (2S 550): 100g