Alien DH410 Folding

By ShamanBondFPV on Aug 17, 2016

15 506  2 

Alien 410mm Folding Build - Weight with Battery and Cam - 1610g - Flight Time Approx. 10-15min

Photos

Part List

Frame

DH410 FPV Folding Carbon Fiber Quadcopter Frame with Retractable Landing Skid 410mm Wheelbase
Goodluckbuy.com
$102.46

Flight Controller

APM Flight Controller Set APM 2.8 6M/H GPS & OSD & Radio Telemetry etc (2 builds)
Banggood.com
$99.98

ESCs

4 x DYS - XM20A V2 - BLheli Bootloader and Firmware (35 builds)
Readymaderc.com
$51.96

Motors

4 x SunnySky V2216 900kv Brushless Motor
Fpvheadquarters.com
$59.96

Propellers

Multirotor HQ Prop - Carbon Composite - 10x4.5
Readymaderc.com
$1.99

Propellers

Multirotor HQ Prop - Carbon Composite - 10x4.5R
Readymaderc.com
$1.99

FPV Camera

Foxeer HS1177 IR Block FPV Camera (58 builds)
Fpvheadquarters.com
$39.99

FPV Transmitter

Angry Beez FX799T 200mw 40 CH Video Transmitter (37 builds)
Fpvheadquarters.com
$34.99

Antenna

TBS Triumph 5.8 GHz Antenna - SMA (244 builds)
Fpvheadquarters.com
$39.95

Receiver

2 x FrSky X8R Receiver (2 builds)
Fpvheadquarters.com
$69.98

Batteries

RMRC Orange Series - 5100mAh 4S 35C Lipo - XT60 (75.5Wh)
Readymaderc.com
$49.99

Power Distribution

Matek Mini Power Hub Power Distribution Board With BEC 5V And 12V For FPV Multicopter (34 builds)
Banggood.com
$5.60

Misc Parts

3-Axis Brushless Gimbal Camera Mount with 32bit Storm32 Controller for Gopro 3 4 FPV Black (9 builds)
Goodluckbuy.com
$70.49

Misc Parts

YI 88001 16MP Action Camera with High-Resolution WiFi and Bluetooth, Black
Amazon.com
$69.99

Misc Parts

2 x Antenna Mount Holder for Frsky X8R X6R L9R Receiver 3D Printed (3 builds)
Banggood.com
$3.58
Show stores (5)

Discussion

Sign in to comment.
PinakOza   Aug 24, 2016  

Hello Erisian, thank you for sharing such a nice build. I would like to switch myself from heavier TBS-Disco to lighter DH410. Could you please tell me the over-all weight of your quadcopter including battery; and how long it flies?
You can check my existing TBS-Disco with specs, here:

Show 11 more comments
PinakOza   Sep 24, 2016 

Though I have mounted gimbal suspended down from the frame now, the screen shot that I have shared with you is for Upright vertical (top) mounting with Mobius/Runcam on it.

PinakOza   Sep 24, 2016 

Also NOW I have changed the original HAKRC metal frame to Goodluck buy plastic frame, as the original is broken. Weight of quad is 1340 grams after installation of gimbal and Runcam-HD.

PinakOza   Nov 02, 2016 

Hello, I messed up with my Pixhawk PID; can you please share your APM PID?

Gear Reviews

4 848 
By Whiffles 15 days ago

The ThinkTank FPV Airport Helipak is the premier travel bag for FPV enthusiasts. I've taken this bag across the country and around the world, and I really can't imagine a better pack for the job. It's huge. It's the size of a carry-on luggage, and it's designed specifically for FPV. It offers customizable compartments that can store a handful of quads, a transmitter or two, a couple sets of goggles, batteries, tools, props and a laptop. If you're feeling lazy you can even pack a couple quads without removing the props. You'll never find yourself saying, "I wish my bag was bigger." Build Quality This is a nice bag. It offers enough padding to securely carry all your FPV gear. The exterior padding is quite thick and rigid. I feel safe packing my goggles and transmitter without any additional keep reading..

4 911 
By Whiffles Oct 24, 2017

The EV100 Micro AV Recorder is a DVR for the Eachine EV100 headset. Eachine should have built this into the headset, but here we are. It's about the size of a matchbook and works quite well despite a short learning curve. It's powered by the same battery included with the EV100 and uses the white balance lead. Other than that you can use either of the included 2.5mm to 3.5mm cables to plug it into the video input/output port of the EV100. You can either strap it beside the battery in the headstrap or use the included double sided tape to mount it to the top of the goggles. Vs the Eachine ProDVR This is obviously a repurposed Eachine ProDVR, but it does simplify the design. The ProDVR has different pins for each input and output. In fact the entire side of the unit is dedicated to various keep reading..

Are you sure you want to unfollow this person?
Are you sure you want to delete this?
Click "Unsubscribe" to stop receiving notices pertaining to this post.
Click "Subscribe" to resume notices pertaining to this post.