Budget build with many old re-used parts, to be thrashed in gym racing sessions during winter season.
RCX motors and Littlebee ESCs are leftovers from an old LS210 build. CC3D was bought used, not even sure if it works - will find out :) Realacc X210 frame is the only new part in this build, sourced it for cheap with a Realacc coupon from BG.
Frame |
Realacc X210 214mm 3mm/4mm Carbon Fiber Frame RC Drone FPV Racing w/ Matek PDB-XT60 5V & 12V
(33 builds)
Banggood.com
|
$24.99 |
Flight Controller |
OpenPilot CC3D Flight Controller Staight Pin STM32 32-bit Flexiport for RC Drone FPV Racing Multi Rotor
(4 builds)
Banggood.com
|
See Site |
ESCs |
4 x Favourite FVT LittleBee 20A OPTO PRO ESC BLHeli 2-4S F396 Supports OneShot125 for RC Drone FPV Racing
(20 builds)
Banggood.com
|
$44.76 |
Motors |
4 x RCX H2205 2633kv Motor
(8 builds)
Getfpv.com
|
$51.96 |
Propellers |
DAL T5040 V2 Tri-Blade
(45 builds)
Dalprops.com
|
$2.49 |
FPV Transmitter |
ImmersionRC Raceband 5.8GHz 25mW A/V Transmitter
Getfpv.com
|
$33.99 |
Antenna |
ImmersionRC 5.8GHz Circular Polarized SpiroNet Antenna V2 (RHCP SMA)
Hobbyking.com
|
$42.38 |
Receiver |
Frsky d4r-ii 2.4g 4ch accst Telemetrienempfänger
(2 builds)
Banggood.com
|
$4.00 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for olexs