My take on the Catalyst Machineworks Massive Droner HD. I went for the cleanest possible build inspired by FPV-FlightClub's work. All factory TPU was replaced with custom parts designed in Fusion360. I try to minimize zip-ties and tape in my builds. All components including battery backup buzzer are contained neatly within this VERY tight frameset. Weight is 283g w/850mah pack and 249g w/640mah pack. Will report back after I put that few packs through it.
Hope you enjoy!
Frame |
Massive Droner 3 inch - HD
(5 builds)
Catalystmachineworks.com
|
$47.99 |
Flight Controller |
iFlight SucceX-D Mini F7 TwinG Stack (Mini F7+40A ESC)
(9 builds)
Pyrodrone.com
|
$79.99 |
ESCs |
iFlight Succex-D Mini 32Bit 40A 2-6S 20x20 4in1 ESC
(14 builds)
Racedayquads.com
|
$32.99 |
Motors |
4 x T-Motor F20II F20 II 1408 3750KV Brushless Motor 2-4S For 130 140 150 Multi Rotor
(22 builds)
Banggood.com
|
$71.96 |
Propellers |
2 Pairs HQProp DP3X4X3V1S Durable 3040 3x4 3 Inch 3-Blade Propeller for RC Drone FPV Racing
(13 builds)
Banggood.com
|
$3.01 |
FPV Camera |
Caddx Vista Digital HD System for DJI HD FPV
(98 builds)
Pyrodrone.com
|
$164.99 |
Antenna |
TBS Crossfire Immortal T V2 Antenna
(149 builds)
Pyrodrone.com
|
$5.95 |
Receiver |
TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER
(1486 builds)
Team-blacksheep.com
|
$24.95 |
Batteries |
FlexRC FPV Racing Drones | FPV Multicopter Store | Quadcopter Parts
(101 builds)
Flexrc.com
|
$52.50 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hi,
Nice build! How did you mount the TBS Immortal antenna?
Thank you,,
Sm
I designed some 3D printed mounts. You can get the files at the link below.
https://www.thingiverse.com/thing:4886365
Thank you for this ! It is much appreciated
Sorry to bother you again Would you be able to send a few pictures on how you use the the 3D printed mounts that you designed? it's not very clear on how they are installed.
Thank you
Sorry to bother you again Would you be able to send a few pictures on how you use the the 3D printed mounts that you designed? it's not very clear on how they are installed.
Thank you