Made some insane peace.
5", 2800kv. Weight without battery 289g.
Betaflight 3.2.5
Tramp telemetry on UART6 TX.
On Tattoo F4S there is no UART3 TX/RX pins. So used Led Strip pin for Smart Port telemetry on Soft Serial 1. Had to use "set tlm_inverted = ON".
LiPo Connector saver from Thingverse: XT60 connector saver protector
Photos
How are the bearings holding? I'm guessing that any problems with the bearings would be more obvious with a higher kv variant of a motor
After around 20 packs, everything seems to be fine :) And this quad screams for punches :D