My first build outside of whoops. Pretty straightforward Racefilght setup. After this comes a 5". Pretty happy with it so far.
Frame |
MODE 2 GIZMO 3" FPV RACING FRAME
Pirofliprc.com
|
$22.00 |
Flight Controller |
FlightOne Millivolt Flight Controller
(13 builds)
Getfpv.com
|
$34.39 |
ESCs |
RaceFlight Spark 4n1 ESC
(11 builds)
Pirofliprc.com
|
$29.99 |
Motors |
4 x Brotherhobby Tornado T1 1407 2800KV 4100KV 4S Racing Edition Brushless Motor for RC FPV Racing Drone
(10 builds)
Banggood.com
|
$99.96 |
Propellers |
Gemfan 3052 - 3 Blade Propeller - Red PC (Set of 4)
(6 builds)
Getfpv.com
|
$2.99 |
FPV Camera |
RunCam Micro Swift 2 Orange 2.1 Lens
(49 builds)
Pirofliprc.com
|
$26.99 |
FPV Transmitter |
RunCam TX200U Micro 25-200mW VTX Backpack for Micro Swift - U.FL
(14 builds)
Racedayquads.com
|
$11.39 |
Receiver |
XM PLUS (Mini SBUS Non-telemetry Full Range)
(1158 builds)
Pirofliprc.com
|
$12.99 |
Batteries |
TATTU 650mAh 4S1P 75C 14.8V Lipo Battery Pack with XT30 plug
(45 builds)
Getfpv.com
|
See Site |
Mounting the camera in the slits above the mounting holes allows for more camera angle and gets the props a little more out of view. Just a thought.
Great tip! Thanks.