Another freestyle quad.
It's good to have a backup :)
Camera was changed to Runcam Swift 2 Rotor Riot Edition!
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hello Friend,
Would you be so kind as to tell me how you made the connection between Camera + VTX and FC?
I have the same components and you would doubt how to feed the RunCam ....
Thanks in advance! regards
Hi @zarcocqc.
I don't remember which pads I used for cam/vtx, but they are layout on the upper left corner of the board.
Check Kakute F4 v2 manual for pinouts. Kakute has one of bf rest described manuals that I've ever seen. There are sections for both vtx and cam, how to write them. It will be ready with manual, trust me.
If you won't manage to do it with manual, I'll make a photo of my pinout.
Greetings,
Rafal
Right, the manual is very clear with these aspects. I have fed the cam with the battery pad (vcc) and the vtx to the 5v pad. It looks all right!
Thanks for the help, greetings!