Mockup

FIERE130 ( ex- fighter130 )

By brel on Apr 16, 2018

0  53  0

Fighter130 was light quad and very quick responce with 2s but FPV antenna is cheap and clushed frame and it return with FIRER130 frame and still light.
And I use lizard105 DVR and camera. It is cheap and light weight 60FPS than Runcam split.

5 PCS Super Loud 5V Active Alarm Buzzer Beeper Tracker 9*5.5mm for RC MultiRotor FPV Racing Drone
https://banggood.app.link/fLMoig8WXL

Hyperion フック & ループリール, 幅12mm / 長さ800mm (黒) [AK-VLOOPBLK12]
http://helimonster.jp/?pid=100276188

HQ Durable Prop T3x3x3 Light RED (2CW+2CCW)-Poly Carbonate [HQ-794585]
http://helimonster.jp/?pid=127778443

5.8G Mushroom Antenna for Micro Camera (5cm) [09-370]
http://helimonster.jp/?pid=127091074

FrSky XMR-P 2.4Ghz 16CH Micro Receiver w/ SBUS [FRSKY-XMP]
http://helimonster.jp/?pid=113835962

EWRF 7087U 5.8G 48CH Raceband 0/25/100/200mW Switchable FPV Transmitter [08-316]
http://helimonster.jp/?pid=124100414

Realacc Orange85 FPV Racer Spare Part 1106 6000KV 1-3S Brushless Motor for RC Drone FPV Racing
https://banggood.app.link/iLapSbBTXL

Eachine Lizard105S FPV Racing Drone Spare Part 720P HD CMOS 1/4 FPV Camera
https://banggood.app.link/fvGUWPGTXL

Eachine Lizard105S FPV Racing Drone Spare Part 1280x720P HD 5V DVR
https://banggood.app.link/CMcLiiITXL

予備

LDARC/KingKong FPV EGG Li-Polymer Battery 7.4V (2 Cells) 550mAh 80C[02-088]
http://helimonster.jp/?pid=124572388

3x2.5" T-Type 3025 Multirotor Propeller (GemFan / 2 Pairs / Black) [01-607]
http://helimonster.jp/?pid=110665208

Fighter130
http://www.gearbest.com/brushless-fpv-racer/pp_663418.html

Photos

Discussion

Sign in to comment

Guides & Reviews

27 1,299  11
18 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
43 4,845  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more