The tough thing about this build was soldering the wires between the video transmitter and the Runcam. I was very pleased how this turned out. Very, very, very, very fast for such a small thing. 3.3oz.
I used the 'SPEKTRUM' pads for the Lemon satellite receiver. I used the Power from the 'OSD' for the video transmitter.
I used a touch of hot glue to hold things in place, and one zip tie per set of motor wires.
Update #1 8/11
re: maseffect on /r/multicopterbuilds suggestions to decase the Lemon, so I've done that. It is smaller, but the weight lost is negligible. The next update will be the 3d printed parts kit, that will be update #2.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I have Emax 1106 7500kv and they were running hot on 3s 2.5", how are you running them on 4s without burning them up? Custom PIDS? Capped Throttle?