Hyde

By LooseTransistor on Oct 22, 2016

3  218  4

Out of the ashes of Lil' Beaver + a few other parts I scrounged up I re-built 2 race quads for an upcoming event in Niagara Falls.

I wanted two quads that where as close to identical as possible, but with limited funds I had to do with what I had. Hyde is the tamer of the two Martian III's I have built. Running on Raptor 30A and 2204/2300kv Storm Motors. Not a bad combo at all.

But Jekkyll... Jekkyll is almost done, it will have a DYS 30A + DYS 2205/2550kv Powerplant. Truly a monster. Should have the build up in a couple of days.

Photos

Discussion

Sign in to comment

MrTreeFPV   May 17, 2017  

How do you get 5 volts from the stock pdb

LooseTransistor   May 17, 2017 

I actually don't I am running the VTX from Vbat and any 5V I need I take from the FC

Whiffles   Oct 22, 2016  
1

Looks like you've got the opposite problem I had. I made a blue themed quad and they sent me a red antenna.

LooseTransistor   Oct 24, 2016 

Hahaha yea, in my case its all I had sitting around =P

Guides & Reviews

39 3,868  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,710  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more