My cleanest build so far, mainly thanks to the components. Unify gets so hot it melted the stock plastic heat shrink.
Frame |
FlightClub PROton | Race Drone Frame - FPV FlightClub
(14 builds)
Fpv-flightclub.com
|
$70.00 |
Flight Controller |
Helio Spring IMU-F Flight Controller v2 - FPV FlightClub
(35 builds)
Fpv-flightclub.com
|
$41.99 |
ESCs |
Aikon AK32 BLHeli32 2-6s 4in1 ESC - FPV FlightClub
(2 builds)
Fpv-flightclub.com
|
$66.00 |
Motors |
Rotor Riot Hypetrain Ummagawd 2306-2150kv motor
Rotorgeeks.com
|
$30.52 |
Propellers |
GEMFAN 5552 3 Blade Flash Series Props Black (new)
Rotorquest.com
|
See Site |
FPV Camera |
FOXEER Arrow Micro v2 Black - FPV FlightClub
(2 builds)
Fpv-flightclub.com
|
$31.99 |
FPV Transmitter |
TBS UNIFY PRO 5.8GHZ V3 - FPV FlightClub
Fpv-flightclub.com
|
$40.00 |
Antenna |
TBS TRIUMPH-STUB SMA (LHCP 2PCS)
Rotorquest.com
|
See Site |
Receiver |
FrSky R-XSR Receiver - FPV FlightClub
Fpv-flightclub.com
|
$19.99 |
The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..
Read moreUpdate! Happymodel has released a new V2 Frame which uses a more durable plastic. The Happymodel Mobula7 is one of those rare treats to hit the micro scene. Countless models hit the market every month, but this one just happens to check all the boxes. It's a 2S brushless micro with a 75mm motor stance. It's slightly larger than the more traditional 65mm brushed micros, but it's still quite small...
Read more
nice and clean