Transtec Lightning Racer Build 2

By widelec on Nov 28, 2018

25  1,023  10

My light weight clean and powerfull 5 inch racing Quad setup
Transtec 5mm arm thickness racing frame
New rcinpower GT2305 2550kv V2 beatifull motors
Mamba 3-6s 40A ESC F4 FC


Part List


Transtec Lightning Frame Kit (9 builds)

Flight Controller

Mamba F405 Flight Controller Betaflight STM32 MPU6000 OSD Built-in 5V/2A BEC (8 builds)


ESC-MAMBA F40 4 IN 1 40A ESC Dshot600 3-4S For Diatone GT M530 R530 FPV Racing RC Drone (13 builds)


4 x RCINPOWER GTS V2 2305 2550kv 2650kv or 2306 2500kv 2750kv Motor (2 builds)


2 Pairs Dalprop Cyclone T5040C 5 Inch 3-blade Propeller CW CCW for RC FPV Racing Drone (100 builds)

FPV Camera

Upgraded Mista 800TVL CCD 2.1mm Wide Angle HD 1080P 16:9 OSD PAL/NTSC FPV Camera for RC Drone (3 builds)

FPV Transmitter

Eachine VTX03S 0/25/50/100/200mw 40CH 5.8G FPV Transmitter With PITmode Smartaudio Function (37 builds)


Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH for RC FPV Racing Drone (1368 builds)


FrSky Taranis QX7 2.4GHz RC Transmitter - Black or WhiteBlack / No (205 builds)


Skyzone SKY03O Oled /SKY03S 5.8GHz 48CH Diversity FPV Goggles Support OSD DVR HDMI With Head Tracker Fan LED For RC Racing Drone (11 builds)

HD Camera

GoPro HERO7 Black Action Camera (67 builds)

Misc Parts

transtec lighting antenna holder by Shneakypete (2 builds)
See Site

Misc Parts

FuriBee GT215, TransTEC Lightning GoPro Session TPU mount by AlMuz (2 builds)
See Site

Misc Parts

Air-plush TPU bumper/softmount for 2306, 2308, 2205 motor by AlMuz (2 builds)
See Site

Radio Module

TBS Crossfire Micro TX (102 builds)

Battery Charger

ToolkitRC M8 DC 300W 15A Battery Balance Charger Discharger for 2-8S Lipo Battery (15 builds)

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (145 builds)
Show stores (7)


Sign in to comment

FissionBomb   Nov 28, 2018  

I love this frame. It's a beaut. I'm inspired to go build one myself.

widelec   Nov 28, 2018  

if need uart for smart port telemetry ppm pin can usable via soft serial. Cli code ;

resource PPM 1 none
resource SERIAL_TX 11 C09

Matamax   Nov 28, 2018  

hm....should i go with this or the transtec frog? i cant decide

widelec   Nov 28, 2018 

I think lightning faster, frog is stronger.

Matamax   Nov 28, 2018 

and have you had any durability issues, hows the mamba stack?

widelec   Nov 28, 2018 

No, I had no problems. I have got two mamba stack.

lorentz   Nov 28, 2018  

nice built! weight?

widelec   Nov 28, 2018 


Thomaat   Nov 28, 2018  

Nice build man! I feel like this build packs quite a punch for the money huh? You mind showing us some DVR or possibly on board footage?

widelec   Nov 28, 2018 

Thanks man, i'll add video, I just finished

Guides & Reviews

26 1,878  27
21 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,775  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more