DiA Tiny Whing V2

By DiAleksi on May 27, 2019

26  780  6

My second version of Tiny Whing designed to be built on FliteTest 5mm water resistant foam board. Much easier and faster to build, no carbon fibre spars needed.

I also made it a 2S version. So here is a part list for the 2S build.

More info, files and building instructions on Thingiverse.com/thing:3655383



Sign in to comment

StickyRice   May 30, 2019  

you might want to make a canopy lmaooo but that does look sick!!

DiAleksi   May 30, 2019 

Näh, no canopy! Let's keep it simple :D

BrOverBee   May 29, 2019  

Any video (DVR or LOS) of how it flies?

DiAleksi   May 29, 2019 

here's a windy maiden.

FrenchB   May 28, 2019  

Awesome looking little wing! But that PH2.0 to XT30 adapter looks a little suspect. I’d suggest it would make sense to put some heat shrink on it next time.

DiAleksi   May 29, 2019 

Heatshrink is almost impossible to put on in, as it will not seal it completely. I you want to isolate from the water, use conformal coating. I flew many times in the rain without any probs ;)

Guides & Reviews

39 4,020  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,820  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more