I tried to include here everything you need to build a great budget quad that is easy to repair as well as a full setup for the complete beginner. I recommend every part here as being worth keeping long term. The goggles aren't great but they get you in the air while you shop for the expensive FatSharks. Even after you upgrade you can use the ev800 as a screen for the bench work or showing friends your flying.
The pictures show all wire locations and approximate length. Note I soldered to the unlabeled under side of the FC for a cleaner build. ports tab photo shows serial RX on uart 1 with tbs smart audio on uart 3. the vtx and receiver are stuck to the frame with 3m two side adhesive. use zip ties and shrink wrap to mount the radio and video antennas. I used a 3d printed mini to micro camera adapter because the smaller micro cams break less often for me mounted like this. I did not use the included capacitor and both video and osd are noise free. flying 8-9 minutes with the 2200 mAH 3s  batteries for extra practice time. It rips a proper 3-4 minutes with 1550 mAH 4s. Plenty of power, the motors feel smooth with top end that surprised me, honestly the first of these I've had i really hope they can take a few hits each and I'll gladly buy new ones for their price rather than replace bearings on more costly motors. I had some tuning problems at first with betaflight 4.0.3 so i flashed firmware 3.5.7 and it flew almost perfect with a high speed shake. I lowered the P term on both roll and pitch by 5 and its done. Thanks for having a look I hope this can be of some help to someone. Any questions i will be glad to help.