I really like this frame. When I saw it, I knew it was my next build. At first it looked like it would be a tight fit, but the ESC location makes a lot of room up top. It is a little awkward with the upside down mounting on the canopy, but all in all a quick and easy build.
I am selling this one. Never been flown! $225.00. LMK if interested.
Photos
Part List
Frame |
Merica-X 5 Inch (no canopy)
(5 builds)
Catalystmachineworks.com
|
$65.99 |
Flight Controller |
XRotor Micro Combo - F4 G2 FC - 45A 4-in-1 ESC
(7 builds)
Getfpv.com
|
$89.99 |
Motors |
4 x Lumenier 2207-7 2700KV JohnnyFPV V2 Motor
(5 builds)
Getfpv.com
|
$103.96 |
Propellers |
DAL Cyclone T5040C Pro Tri-Blade 5" Prop 4 Pack - Choose Your Color
(26 builds)
Racedayquads.com
|
$2.09 |
FPV Camera |
RunCam Swift 2 Micro - 2.1mm Lens
(27 builds)
Getfpv.com
|
$26.99 |
Antenna |
Lumenier Micro AXII SMA 5.8GHz Antenna (RHCP)
Getfpv.com
|
$19.99 |
Receiver |
FrSky R-XSR 2.4GHz 16CH ACCESS/ACCST Micro Receiver w/ S-Bus & CPPM
(937 builds)
Getfpv.com
|
See Site |
Batteries |
Tattu 11.1V 3S 850mAh 75C LiPo FPV Battery - XT60
(12 builds)
Racedayquads.com
|
$14.50 |
Misc Parts |
RAZORBACK CANOPY - MERICA FRAMES
(2 builds)
Catalystmachineworks.com
|
$19.99 |
im interested in seeing your other drones also. is this possible?
I just took a hi res pic. Here is link.
http://www.ialonline.com/drones.jpg
You should be able to zoom in and see pretty good details. All made with best components. The imersion vertex is the only one I purchased RTF. Also, most have not been flown, just tested. Let me know if you have questions. Also have components, stacks, props, radios etc. all top of the line. Pretty much selling off my hobby.
Allen
Just posted one of my analog builds.