My setup

By Lorenzpit on Jun 21, 2020

5  167  1

This is my first ever Fpv drone and Drone build so i didn't go for the most expensive stuff.

Part List

Frame

RDQ Source One V3 5" Freestyle Frame - 4mm V0.3 Arms (10 builds)
Racedayquads.com
$26.95

Flight Controller

DALRC F405 30x30 Flight Controller - OSD, 9V/3A BEC, MPU6000 (21 builds)
Racedayquads.com
$31.99

ESCs

DALRC Engine Pro 32Bit 40A 3-5S 30x30 4in1 ESC w/ BECDefault Title (4 builds)
Racedayquads.com
$49.99

Motors

4 x EMAX ECO Series 2306 2400Kv Motor (53 builds)
Racedayquads.com
$47.96

Propellers

HQ Prop ETHIX S5 5x4x3 Tri-Blade 5" Prop 4 Pack - Light Grey (21 builds)
Racedayquads.com
$3.49

FPV Camera

RunCam Swift Mini 2 "JohnnyFPV Edition" 600TVL CCD FPV Camera (2.1mm) - BlackDefault Title
Racedayquads.com
$32.99

FPV Transmitter

TBS Unify Pro32 HV 5.8GHz Video Transmitter (MMCX) (69 builds)
Getfpv.com
$49.95

Antenna

Foxeer Lollipop V3 5.8GHz 10CM Long Range SMA Antenna 2 Pack - RHCP - Choose Your Color (11 builds)
Racedayquads.com
$19.90

Antenna

Foxeer Lollipop V3 5.8GHz SMA Antenna 2 Pack - RHCP - Choose Your Color (12 builds)
Racedayquads.com
$19.90

Antenna

Foxeer 8DBi Echo Patch Antenna Feeder FPV Goggles RHCP BLACK
Ebay.com
See Site

Receiver

FrSky R-XSR 2.4GHz 16CH ACCST Micro Receiver w/ S-Bus & CPPM (849 builds)
Getfpv.com
$20.99

Batteries

8 x Tattu FunFly 14.8V 4S 1550mAh 100C LiPo Battery - XT60 (29 builds)
Racedayquads.com
$159.92

Radio

FrSky Taranis Q X7 2.4GHz 16CH Transmitter (Black) (15 builds)
Getfpv.com
$107.99

Goggles

FatShark Recon V3 FPV GogglesDefault Title (5 builds)
Racedayquads.com
$89.00

Misc Parts

XT60 Pigtail 14AWG 4" - Choose Your ColorXT60H Yellow (15 builds)
Racedayquads.com
$1.69

Accessories

FrSky NiMH Akku AA2000 mAh für Taranis Q X7 alte Version kaufen | FPV24.com
Fpv24.com
See Site
Show stores (4)

Discussion

Sign in to comment

IcarusIX   20 days ago  

why the washers on the motors? welcome to the hobby though :)

Guides & Reviews

39 4,032  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,827  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more