Ruby Raver - Anticrime v3

By VVViljo on Aug 05, 2019

19  704  6

The moment I saw this frame I knew I wanted to make a build out of it. Got the parts little by little mostly from Banggood sales and here is the finished drone. Hopefully GPS module arrives soon so I can add it on the drone.

I will upload some flight footage to my Instagram.

Shoutout to DiAleksi for creating such a beautiful frame!

Photos

Part List

Frame

Anticrime V3 - 3" LR HD quad by DiAleksi (3 builds)
Shop.brickracing.com
$32.90

Flight Controller

MAMBA F722 MINI Betaflight Flight Controller OSD 5V/2A & 306 30A 2-6S Blheli_32 Dshot1200 FPV Racing Brushless ESC for RC Drone (12 builds)
Banggood.com
$85.49

Motors

4 x URUAV ZD1105 5500KV 6500KV 2-3S Brushless Motor CW for RC Drone FPV Racing Multirotors
Banggood.com
$29.16

Propellers

2 Pairs Gemfan Flash 3052 PC 3-blade Propeller 5mm Mounting Hole for 1306-1806 Motor RC FPV Racing Drone (28 builds)
Banggood.com
$3.47

FPV Camera

Caddx Ratel 1/1.8'' Starlight HDR OSD 1200TVL NTSC/PAL 16:9/4:3 Switchable 1.66mm/2.1mm Lens FPV camera For RC Drone
Banggood.com
$28.48

FPV Transmitter

Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter TX LED Display Support OSD/Pitmode/Smart Audio (16 builds)
Banggood.com
$12.90

Antenna

1 Pair Foxeer Lollipop 2 RHCP SMA/RP-SMA 5.8G 2.5dBi Super Mini Antenna For FPV Racing Drone (2 builds)
Banggood.com
$9.90

Receiver

Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH for RC FPV Racing Drone (1422 builds)
Banggood.com
$13.69

Batteries

Turnigy nano-tech 1000mAh 3S 45~90C Lipo Pack
Hobbyking.com
$13.54

Radio

FrSky Taranis Q X7 Digital Telemetry Radio System 2.4GHz ACCST (White-no plugs) (Standard Version) (218 builds)
Hobbyking.com
$104.99

Goggles

Fatshark Dominator HD3 Core 3D FPV Goggles with HDMI DVR Support Head Tracker (69 builds)
Banggood.com
$399.00

HD Camera

DJI Osmo Action 329,90
Verkkokauppa.com
$329.90

Misc Parts

5PCS Banggood 220mm Battery Tie Down Strap for RC Drone (17 builds)
Banggood.com
$2.12

Video Receiver

ImmersionRC RapidFIRE w/ Analog PLUS Goggle FPV Receiver Diversity Module (145 builds)
Banggood.com
$149.00

Battery Charger

Turnigy Accucell-6 50W 6A Balancer/Charger LiHV Capable (3 builds)
Hobbyking.com
$28.45

Soldering Iron

MINI TS100 Digital OLED Programable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (170 builds)
Banggood.com
$49.99
Show stores (4)

Discussion

Sign in to comment

esperFinal   Aug 09, 2019  

do you know if you can get this frame in north America?

VVViljo   Aug 11, 2019 
1
dwhacks   Sep 02, 2019 

When I put in "calculate shipping" it only gave me the option for local pickup!

HK-AERIAL VTOL   Aug 06, 2019  

What kinda GPS are you gonna use? I am really liking the BN-220 ($11). Super simple and I get between 8-13 satellites inside my room!

VVViljo   Aug 11, 2019 
1

I am going to use BN-220! Hopefully mailman brings it next week.

HK-AERIAL VTOL   Aug 11, 2019 

It does really work well... I prefer the +-\TX\RX scheme to the I2C. It comes with two cables so you can use one betweeen two quads.

Guides & Reviews

26 1,241  11
17 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
42 4,827  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more