Old heap.

By TheDabMeister on Aug 17, 2019

3  97  1

This saucy boii started life in the beginning of february 2018.

Part List

Flight Controller

PYRODRONE F4 OSD V2 with VTX PIT mode (21 builds)
Pyrodrone.com
$32.99

ESCs

Aikon AK32 V2 32Bit 35A 2-6S 30x30 4in1 ESC w/ BEC (36 builds)
Racedayquads.com
$62.99

Motors

4 x 3B-R 2207 2650KV 2-4S CCW Thread Brushless Motor for RC Drone FPV Racing (3 builds)
Banggood.com
$79.28

Propellers

HQProp 4.8x3.4x4 PC Propeller (Set of 4 - Gray) (2 builds)
Getfpv.com
$3.99

FPV Camera

Foxeer Arrow Micro Pro 1/3" CCD 2.1mm 4:3 600TVL PAL/NTSC FPV Camera with OSD Black/Blue/Red (228 builds)
Banggood.com
$20.70

FPV Transmitter

ImmersionRC Tramp 2-6S HV (US Version) 25-600mW VTX - U.FL (40 builds)
Racedayquads.com
$29.99

Antenna

VeeRace FPV 5.8GHz flat u.fl (3 builds)
Actuna.com
$29.99

Receiver

TBS Crossfire Nano RX - FPV Long Range Drone Receiver (568 builds)
Team-blacksheep.com
$24.95

Batteries

5 x CNHL MiniStar 14.8V 1500mAh 4S 120C Lipo battery XT60 Plug for RC Drone FPV Racing (11 builds)
Banggood.com
$138.15

Radio

Original FrSky 2.4G 16CH ACCST Taranis X9D Plus Transmitter Carton Package for RC Drone FPV Racing (44 builds)
Banggood.com
$268.74

Goggles

FatShark Dominator HDO 4:3 OLED Display FPV Video Goggles 960x720 for RC Drone (108 builds)
Banggood.com
$499.99

HD Camera

GoPro Hero5 Session Waterproof 4K Video Camera
$202.72

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (129 builds)
Getfpv.com
$149.99

Radio Module

TBS Crossfire Micro TX (102 builds)
Team-blacksheep.com
$69.95

Battery Charger

EOS 0720i Super DUO3 7S Dual Port DC Charger (500w x2)
Hyperion-world.com
See Site

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (145 builds)
Banggood.com
$53.99

Tools

Drillpro 4pcs 1.5/2.0/2.5/3.0mm Hex Screwdriver Bit HSS Titanium Coated Repair Tool Set (15 builds)
Banggood.com
$10.29
Show stores (8)

Discussion

Sign in to comment

Luka   Aug 17, 2019  

saucy

Guides & Reviews

26 1,878  27
21 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,775  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more