MicroBlivion II Bling

By dwhacks on Sep 02, 2019

17  367  4

Dave_C's Microblivion II frame 3D printed with Filaments.ca EcoTough PLA and tempered on the bed for ~1hr @ 75-80c

Still waiting for the GNB 2s batteries. Currently flying with some AirBladeUAV 500mah 2s batts.

This is my 3rd print of the frame. The first one I didn't temper and it broke the first crash. The second one I tempered 45 min @ 70c lasted quite a few batts until an incident with a rock. The third one is holding well so far.

Photos

Part List

Frame

The Microblivion II by Dave_C_FPV (6 builds)
Thingiverse.com
See Site

Flight Controller

GEPRC GEP-12A-F4 V1.1 F411 F4 Flight Controller AIO OSD BEC & 12A BL_S 2-4S 4In1 ESC for RC Drone FPV Racing (8 builds)
Banggood.com
$43.70

Motors

4 x FLYWOO NIN 1103 Motors (4 builds)
Flywoo.net
$43.96

Propellers

HQ Prop T-Mount 65mm Prop with 1.5mm Hub (5 Pairs)Orange (9 builds)
Airbladeuav.com
$2.99

FPV Camera

RunCam Nano 2 1/3" 700TVL 1.8mm/2.1mm FOV 155/170 Degree CMOS FPV Camera for FPV RC Drone (12 builds)
Banggood.com
$20.99

FPV Transmitter

HGLRC GTX NANO 5.8G 48CH BFOSD 0mW/25mW/50mW Switchable NTSC/PAL FPV Mini Transmitter (20 builds)
Banggood.com
$11.81

Antenna

Realacc UXII Stubby RHCP U.FL / IPEX IPX 5.8GHz 1.6dBi Super Mini Antenne für TX RX Fatshark Schutzbrillen R (24 builds)
Banggood.com
$5.99

Receiver

FrSky Ultralight XM Mini Receiver Up To 16CH for RC Drone FPV Racing (6 builds)
Banggood.com
$11.59

Batteries

Gaoneng GNB 7.4V 450MAH 80C 2S Lipo Battery XT30 Plug (2 builds)
Banggood.com
$9.26

Radio

FrSky Taranis X9 Lite 2.4GHz 24CH ACCESS ACCST D16 Mode2 Classic Form Factor Portable Transmitter for RC Drone (9 builds)
Banggood.com
$95.99

Hardware

Suleve™ M2AH3 50Pcs Titanium Plated M2 Hex Socket Cap Head Screws Alloy Steel 12.9 Grade Screw Bolt 4-12mm
Banggood.com
$4.29

Misc Parts

AirBlade Battery Strap for Nano Quads with Metal Buckle (4 builds)
Airbladeuav.com
$1.50

Misc Parts

Nano Pod [14mm] by Dave_C_FPV (4 builds)
Thingiverse.com
See Site
Show stores (4)

Discussion

Sign in to comment

HK-AERIAL VTOL   Sep 07, 2019  
1

I had a Calimero printed in nylon. It's tough as nails.

Igi87   Sep 04, 2019  

nice build! how do you like the motors?

dwhacks   Sep 04, 2019 
1

They feel really well built, and fly very well. I will note, 3 of the 4 seem a little different. One had longer screws included and didnt spin as long as the other 3 when giving them a "flick" with your finger.

Igi87   Sep 06, 2019 

okay, thanks for your feedback :)

Guides & Reviews

28 2,433  33
28 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,951  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more