Microblivion II Carbon Edition

By Ikuiku on Sep 09, 2019

10  428  2

Another amazing design by Dave_C_FPV! Worthy enough to cut in 3.5mm carbon :) I originally printed out this frame in petg and a friend printed some out in carbon fiber pla but I didn't think it would be strong enough to with stand a crash with heavy 1404 motors on it. I edited the center of the fame just a hair to accommodate the Primo style battery holder, but I ended up using a battery strap instead. Being 1404 3850kv motors they are pretty quick and efficient on a 3s Tattu 650mah. But if I really want to crank it up I use a Helination Talon 650mah 4s. The down side to the 650mah 4s is I can really feel the added weight. I need to get more 4s batteries for testing. In the meantime I am going to try some GNB 520 mah 2s in parallel, just like my friend did here https://rotorbuilds.com/build/19874.

Photos

Discussion

Sign in to comment

Igi87   Sep 09, 2019  
1

Nice build! really nice!

Ikuiku   Sep 09, 2019 

Thanks!

Guides & Reviews

39 3,830  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,682  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more