Another TOOTHPICK SucceX / HyperLite

By PhoenixFpv on Sep 12, 2019

3  236  0

Building this toothPick take me less than one hour with this stack
with this combination come out very clean build

Building video

Flight test

Photos

Part List

Frame

DIATONE GTB229 GTB239 Cube 2.5inch Frame Kit FPV Racing Multi Rotor Parts
Banggood.com
$14.99

Flight Controller

iFlight V1 SucceX F4 Flight controller OSD & 12A Blheli_S 2-4S Brushless ESC & 5.8G 25/100/200mW VTX 16x16mm RC Parts from To (3 builds)
Banggood.com
See Site

Motors

4 x Hyperlite Toothpick Motor (2-3S 8022KV) (9 builds)
Pyrodrone.com
$43.96

FPV Camera

RunCam Nano 2 1/3" 700TVL 1.8mm/2.1mm FOV 155/170 Degree CMOS FPV Camera for FPV RC Drone (12 builds)
Banggood.com
$20.99

Receiver

FrSky Ultralight XM Mini Receiver Up To 16CH for RC Drone FPV Racing (6 builds)
Banggood.com
$11.59

Batteries

Infinity LIHV 450mAh 2S XT30 (4pcs) (2 builds)
Drone-fpv-racer.com
$29.00

Radio

FrSky 2.4G 16CH Taranis X9D Plus Transmitter SPECIAL EDITION w/ M9 Gimbals (48 builds)
Getfpv.com
$249.99

Goggles

Fat Shark Dominator V3 FPV Goggles (56 builds)
Getfpv.com
$299.99

HD Camera

GoPro Hero5 Session Waterproof 4K Video Camera
$201.92

Misc Parts

10 PCS 25V 470UF Multirotor FM Series PDB Capacitor 8x12mm for RC Drone FPV Racing (10 builds)
Banggood.com
$2.60

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (129 builds)
Getfpv.com
$149.99

Radio Module

Team BlackSheep TBS Crossfire TX LITE (4 builds)
Heli-nation.com
$149.99

Battery Charger

IMAX B6AC LCD Screen Digital RC Lipo NiMH Battery Balance Charger Discharger Hot (24 builds)
Ebay.com
$28.99

Soldering Iron

TS100 Portable Programmable Smart Soldering Iron (145 builds)
Racedayquads.com
$51.29

Tools

Drillpro 4pcs 1.5/2.0/2.5/3.0mm Hex Screwdriver Bit HSS Titanium Coated Repair Tool Set (15 builds)
Banggood.com
$10.29

Backpack

Torvol Quad PITSTOP Backpack Pro (11 builds)
Getfpv.com
$199.99
Show stores (8)

Discussion

Sign in to comment

Guides & Reviews

27 1,959  27
21 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,791  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more