6 Long Range

By widelec on Dec 24, 2019

7  195  0

Photos

Part List

Flight Controller

MAMBA F405 MK2 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC (87 builds)
Banggood.com
$42.99

Motors

4 x Emax ECO Series 2306 6S 1700KV 4S 2400KV Brushless Motor for RC Drone FPV Racing (52 builds)
Banggood.com
$50.88

Propellers

DAL T6040C Cyclone Tri-Blade (5 builds)
Dalprops.com
$2.29

FPV Camera

Foxeer Monster Mini Pro 1/2.9" CMOS 1.8/2.5mm 1200TVL 16:9 PAL/NTSC Switchable WDR FPV Camera (13 builds)
Banggood.com
$26.67

FPV Transmitter

AKK Infinite DVR VTX 25/200/600/1000mW Power Switchable FPV Transmitter Support Smart Audio (13 builds)
Banggood.com
$24.14

Antenna

Foxeer Pagoda Pro 5.8GHz 2dBi RHCP FPV Antenna 86mm MMCX Black/Red/Orange (12 builds)
Banggood.com
$8.51

Receiver

TBS Crossfire Nano RX (SE) - FPV Long Range Drone Receiver (333 builds)
Team-blacksheep.com
$29.95

Batteries

4 x Sony | Murata VTC6 18650 3000mAh 15A Battery (9 builds)
Imrbatteries.com
$23.96

Radio

Jumper T16 Pro V2 Transmitter with Hall Sensor Gimbals Mode 2 Silver or Carbon (28 builds)
Quadcopters.co.uk
$174.70

Goggles

Skyzone SKY03O Oled / SKY03S 5.8 GHz 48CH Çeşitlilik FPV Gözlük Desteği OSD DVR HDMI Ile Kafa Izci Fanı LED Ile RC Yarış
Banggood.com
$399.00

Goggles

GEPRC Üçlü Besleme Yaması-1 5.8G 9.4dBi FPV LHCP RHCP SMA RC Drone için Reveiver Anten
Banggood.com
$13.50

Misc Parts

Beitian Dual BN-220 GPS GLONASS Antenna Module TTL Level RC Drone Airplane (29 builds)
Banggood.com
$10.25

Radio Module

TBS Crossfire Micro TX V2 (107 builds)
Team-blacksheep.com
$69.95

Battery Charger

ToolkitRC M6 DC 150 W 10A LCD 2-6 S Lipo Batarya Akıllı Dengesi Şarj Boşaltma Voltajı Ile Servo Checker Alıcı Sinyal Test (7 builds)
Banggood.com
$23.99

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (161 builds)
Banggood.com
$53.99
Show stores (5)

Discussion

Sign in to comment

Guides & Reviews

39 3,793  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,655  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more