trying out a 1s 3" on the new rotoriousfpv Little Rebel frame
these 1103 11000kv might be a bit over propped
the FC is a beebrain brushless prototype board. very similar to the production flavour. It can technically take 2s!
It's got the 48khz esc firmware as well as RPM filters so it should be butter smooth...c'mon UK weather...give me a break!

--update 24th Feb 2020
winds calmed down last night and no rain! 3:30-4min on a 450mah LiHV charged at 4.2v is not bad at all.
One pack from maiden session

--update 4th March 2020
swapped out the bee-eye for the betafpv c01 pro - should be looking good for the next flight!
I had to cut the back support brace to get the support thingy to fit around the c01. then the corner of the hood were showing in the frame which I just snipped off. not a bad fit in the end. can't wait to try it!

--update 24 March 2020