Betafpv HX-100
By erikvanschaik on Feb 24, 2020
Just a new build of unused parts. Motors are ordered as 4 pairs (sold by 2 my mistake). first set used in a Tomoquads Sidewinder.
The FC was just a bit too large to fit in a Betafpv 85pro2 and needed a new home too so here it is!
Biggest bang for buck seems the C01 cam (with canopy) and A01vtx with Hx100 frame.
Fairly simple build but tight. Printed a spacer for the canopy to rest and hold the antenna tail.
Bolts from the Goku FC used, FC rotated 180degrees Yaw plane to make batterie lead routing better for balance cable facing backwards.
Props in view is similar like a whoop frame it covers only a small part of the OSD text.
1105 7500kV used. Works well with 2s550mAh and 3s capeable (see post#1 of build thread) 2s450 used here for test hop may try 3s later.
Weather is too poor for outdoor maiden flight now.
Build thread here:
https://www.rcgroups.com/forums/showthread.php?3515221-Retro-toothpick-BEAST-build-%28plz-advice%21%29&perpage=30#post43826437
1st testhop. FS Attitude V5 dvr used:
Photos
Part List
Show stores (3)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for erikvanschaik