GR1FF3 | 3", 3D Printed |

By Flowr. on Feb 23, 2021

2  128  0

Budget 1-2S build with custom 3D Printed GR1FF3 frame (Remastered version)

Flying on Splitted GNB 550mah lipos (1S 80C 550mah XT30)
GF3016 are ok, but not as efficient as i would like to see, ~4 minutes of agressive flying
Happy Model EX1103 8000KV motors are bit slow for 1S, but they rips on 2S
(You need to use 75% throttle limit with this Play F4 AIO 5A board)

Open source design, free files + more info about the frame : https://www.thingiverse.com/thing:4771851

1st prototype of Gr1ff frame - 2018 : https://www.thingiverse.com/thing:2996265
OG Toothpick style Gr1ff - Sep 2018 : https://www.thingiverse.com/thing:3098317

Photos

Discussion

Sign in to comment

Guides & Reviews

37 6,383  52
Nov 19, 2020

FPV has had quite a journey. Just a few years ago we started racing drones around a track and doing flips over trees, but professional cinematic FPV is a more recent development. DJI has always owned the drone photography market, but smaller acrobatic drones are starting to enter the market. They have the advantage of close proximity flight indoors and around people. There's more artistic freedom and..

Read more
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more