This is a build I did back in 2015 when this Frame first hit the scene. This frame came from MRM and uses their high quality carbon fiber, and is not the glossy carbon glass that the eMax version came in. This was the first 4S mini build I did and chose to go with SunnySky 2207-2100kv motors & some slim 20A ESC's to push 6x4.5" HQprops. I also installed the CC3D flight controller because it was what I had at the time.
After tuning the quad and flying it, I did not care for the CC3D and sold this rig to fund a new build :)
Photos
Part List
Frame |
MRM Night Hawk 260mm 100% Carbon Fiber Mini Quadcopter Frame
Multirotormania.com
|
$41.00 |
ESCs |
4 x Sunrise Slim 20A OPTO-ESC
Multirotormania.com
|
$28.00 |
Motors |
4 x Sunnysky X2207s-2100kv - STANDARD THREAD (CW)
– MultiRotorMania
Multirotormania.com
|
$90.00 |
Propellers |
2 x HQPROP - 6x4.5
(2 builds)
Multirotormania.com
|
$2.00 |
FPV Camera |
Mini 600tvl Sony Super HAD CCD FPV Camera
Multirotormania.com
|
$39.00 |
FPV Transmitter |
Boscam Race Band 400mW Mini 5.8G 32CH VTx
(2 builds)
Multirotormania.com
|
$32.00 |
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for AcroFPV