I have Florida Finals coming up and needed two new rigs. This is first time with raceflight and I am now a believer, it's unreal!
Photos
Part List
Frame |
2 x Hyperlite FLOSS 5 inch Racing Frame
(33 builds)
Pirofliprc.com
|
$89.98 |
Flight Controller |
2 x FlightOne Revolt V3
(13 builds)
Pirofliprc.com
|
$77.60 |
ESCs |
2 x DYS F20A 4-in-1 ESC BLHeli_S Dshot
(22 builds)
Getfpv.com
|
$77.98 |
Motors |
8 x Hyperlite 2204 Floss Series 2722KV
(18 builds)
Pirofliprc.com
|
$143.92 |
Propellers |
HQ 5x4.3x3 V1S (2CW+2CCW) PC **Choose Color**
(354 builds)
Pirofliprc.com
|
$3.69 |
FPV Camera |
2 x RunCam Swift 2 Full Size 600TVL CCD FPV Camera w/ OSD (2.1, 2.3 or 2.5mm) - Choose Color & Lens
(412 builds)
Racedayquads.com
|
$69.98 |
FPV Transmitter |
2 x LaForge 5.8ghz 25/200/400mw Switchable Video Transmitter
(12 builds)
Ubuyadrone.com
|
$99.98 |
Receiver |
2 x FrSky XM+ 2.4GHz Micro ReceiverDefault Title
(1149 builds)
Racedayquads.com
|
$31.98 |
Batteries |
8 x CNHL 14.8V 4S 1500mAh 100C G+ Plus LiPo Battery - XT60
(54 builds)
Racedayquads.com
|
$199.92 |
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
The creator of this frame (kababfpv) says that this frame is tough enough for freestyle since the builds are potentiallly around 250g. What is your experience with the durability of this frame and how well does it protect its components (specifically the motors)? Iv had a bad experience with my qavx clone with breaking motors and want to transfer my components over in the near future if it is as durable as kababfpv says
I fly hard and fast, 96% of flight is gate flying. So i have clipped, direct hit and rolled into plenty of gates at ~62 degree tilt and i have to break anything. I have also had luck it seems with motors not being damaged. Dont forget this is a minimalist design for saving weight... so things are going to have much higher potentional of being damaged but that being said, its a beast! Dont buy this and expect this to withstand crash after crash...thats why arms are 5 for 10$...