Baby Quad

By dan on May 23, 2017

4  721  0

A budget 3" build built around some DYS motors I got from NewBeeDrone during the closing out sale. The batteries awere also purchased on sale for $11 a pop, not the $25 listed below.

This build does not use a PDB as the omnibus F3 can take battery voltage, however, a micro BEC was added to power the cam and VTx since the F3 board cannot supply enough current through the 5V reg to power the Rx, Tx, and cam.



Sign in to comment

Guides & Reviews

39 3,869  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,711  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more