Mavis
By georational on Jul 09, 2017
My first build. Takeoff weight ~550g. Betaflight 3.1.7
This build makes use of the built-in PDB and the front-facing LEDs of the original Falcon frame. The RX speaks PPM, the plan is to upgrade to a more efficient protocol.
Photos
Part List
Frame |
Eachine Falcon 250 PRO 250MM DIY Frame Kit with 10 Degree Inclined Motor Base Fast Speed For FPV Rac
Banggood.com
|
$28.99 |
Flight Controller |
Airbot Omnibus F4 Pro V3 30x30 Flight Controller w/ Baro, Current Sensor, OSD and SmartAudio
(61 builds)
Racedayquads.com
|
$26.59 |
ESCs |
4 x Turnigy Multistar BLheli_32 ARM 21A 2g Race Spec ESC 2~4S (OPTO)
(3 builds)
Hobbyking.com
|
$27.48 |
Motors |
4X Racerstar Racing Edition 2205 BR2205 2300KV 2-4S Brushless Motor Black For 210 X220 250 280 RC Drone
(13 builds)
Banggood.com
|
$35.41 |
Propellers |
4 x RaceKraft 5051 TCS (Tripple Crane) Propeller
(123 builds)
Unmannedtechshop.co.uk
|
$5.00 |
FPV Camera |
HS1177 Sony Super HAD II CCD FPV Camera
(4 builds)
Unmannedtechshop.co.uk
|
$21.00 |
FPV Transmitter |
SP2 25/200mW 48Ch Stackable Video Transmitter
Unmannedtechshop.co.uk
|
$20.99 |
Antenna |
Pagoda-2 Omnidirectional Antenna
(9 builds)
Unmannedtechshop.co.uk
|
$5.99 |
Receiver |
REDCON CM703 2.4G 7CH DSM2 DSMX Compatible Receiver With PPM Output
Banggood.com
|
$7.99 |
Nice build, but you might blow your esc's with those props
You're right. The ESCs are a bit of a weak link here, although they can survive 30A bursts. Thanks for the heads-up