F4 Flame Stan200

By yds on Aug 16, 2017

3  187  0

The HGLRC F4 Flame FC/OSD/PDB makes the Realacc Stan200 build possible without the use of the 3mm risers under the cage.

The cage is slightly visible on the sides of the 16:9 view of the 1200TVL Foxeer Monster. The FPV camera lens is completely protected inside the cage.

Two of the 15x15mm mounting holes on the FrSky XSR-M receiver happen to line up perfectly with the slots of the inner top plate.

The VTX is zip tied to the bottom of the top plate with the antenna coming out the back, below the prop line.

One of the RacerStar RF2205 2300kv seen in the pics released the magic smoke on the bench. Final build got re-motored with the good old Emax RS2205 2300kv red bottoms.


Part List


Realacc Stan200 200mm 4mm Arm Thickness Carbon Fiber Frame Kit for Multirotor (2 builds)

Flight Controller

F4 FLAME Race Spec STM32F405 Flight Controller Built-in BETAFLIGHT OSD 5V BEC PDB Current Sensor (20 builds)


4X Racerstar RS30A V2 30A Blheli_S ESC OPTO 2-4S Support Oneshot42 Multishot 16.5 Dshot600 for RC Drone (89 builds)


4 x Emax RS2205-2300 2205 2300KV Racing Edition CW/CCW Motor for RC Drone FPV Racing (84 builds)


10 Pairs Racerstar 5048 5x4.8x3 3 Blade Racing Propeller 5.0mm Mounting Hole for FPV Racer (24 builds)

FPV Camera

Foxeer Monster 16:9 Widescreen 1200TVL Drone FPV Camera 2.5mm Black IR-Block (2 builds)

FPV Transmitter

TH600 5.8G 40CH 600mW FPV AV Mini Transmitter For FPV Racer 250


Aomway 5.8GHz FPV 4 Leaf Clover AV Transmission RHCP Antenna 1 Pair Blue Red w/Canopy For RC Drone (112 builds)


Frsky XSR-E XSR-M D16 OPENTX 2.4G 16CH Dual Telemetry Mini Receiver SBUS CPPM Output (20 builds)


AHTECH Infinity 4S 14.8V 1500mAh 85C Graphene LiPo Battery XT60 Support 15C Boosting Charger (80 builds)


FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2) (42 builds)


Fat Shark Transformer SE FPV Gogglest - FSV1105 | Fat Shark (2 builds)
See Site

HD Camera

RunCam 2 HD 1080P IR Blocked FOV 170° Wide Angle WiFi FPV Camera (10 builds)

HD Camera

Mobius New Version Wide Angle Lens C2 1080P HD Mini Action Camera For RC Drone (6 builds)

HD Camera

GoPro Hero5 Session (196 builds)

HD Camera

GoPro HERO5 Session (196 builds)

HD Camera

HawKeye Firefly 8S 4K WiFi Sports Camera 170 Degree FOV - $137.48 |GearBest.com

HD Camera

GoPro - HERO5 Session 4K Action Camera - Black (3 builds)
See Site

Misc Parts

GEPRC GEP-BP Battery Protection Base Skid Resistance Mat 75MM 85MM 95MM for FPV Racer X Frame Kit (4 builds)

Misc Parts

M3 Bobbins For Flight Controller - 5x5mm - Black (4pc) (12 builds)

Misc Parts

Realacc x210 motor guard by xiconet
See Site

Misc Parts

X-Treme Tape TPE-XR1510ZLR Silicone Rubber Self Fusing Tape, 1.5" x 10', Rectangular, Iron Oxide Red
See Site

Battery Charger

ISDT Q6 Pro BattGo 300W 14A Pocket Lipo Battery Balance Charger (3 builds)

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (161 builds)
Show stores (9)


Sign in to comment

Guides & Reviews

39 3,860  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,704  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more