Mockup

Revisiting first build

By CraterFPV on Aug 25, 2017

0  68  0

Thinking

Part List

Frame

Martian II 220 220mm 4mm Arm Thickness Carbon Fiber Frame Kit w/ PDB For RC Drone (90 builds)
Banggood.com
$18.49

Flight Controller

RDQ Bardwell F4 3-6S 30x30 Flight Controller V2 - JBF4 AIO FC w/OSD (151 builds)
Racedayquads.com
$34.99

ESCs

4 x Spedix ES30 HV 3-6s BLHeli_S DShot600 30A ESCDefault Title (176 builds)
Racedayquads.com
$47.80

Motors

4 x DYS Samguk Series Shu 2306 2250KV 2500KV 2800KV 3-4S Brushless Motor for RC FPV Racing Drone (24 builds)
Banggood.com
$41.16

Propellers

10 Pairs Racerstar S5048 PC 3-blade Propeller 5.0mm Mounting Hole for RC Multirotor FPV Racing Drone (13 builds)
Banggood.com
$6.86

FPV Camera

RunCam Swift Mini 600TVL FPV Camera 2.5mm Lens OSD DC 5-36V FOV 130 Degree CCD NTSC IR Blocked with Mount for Multicopter (Black (44 builds)
Amazon.com
$34.99

FPV Transmitter

Eachine TX526 5.8G 40CH 25MW/200MW/600MW Switchable AV Wireless FPV Transmitter RP-SMA Female (123 builds)
Banggood.com
$11.99

Receiver

FrSky X4R-SB - 3/16 Channel Receiver with SBUS and CPPM without pins (128 builds)
Getfpv.com
$22.49

Misc Parts

5 Pairs Amass XT60H Plug Connector Black With Sheath Housing Male & Female (3 builds)
Banggood.com
$4.99

Misc Parts

DANIU 2M AWG Soft Silicone Flexible Wire Cable 12-20 AWG (1 Meter Red + 1 Meter Black) (2 builds)
Banggood.com
$3.05

Misc Parts

DIY Fixed Mount For Runcam Micro Swift FPV Camera Red & Black RC Drone FPV Racing Multi Rotor (9 builds)
Banggood.com
$2.01

Misc Parts

Battery Non-slip Mat Silicone Compatible 30.5*30.5mm Flight Controller for RC FPV Racing Drone (2 builds)
Banggood.com
$1.68

Misc Parts

Silicone 2mm Thickness Non-slip Mat Battery Anti Skid Pad Battery Mat for RC Drone (19 builds)
Banggood.com
$1.46
Show stores (4)

Discussion

Sign in to comment

Guides & Reviews

28 2,434  33
28 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,951  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more