I really like the design of this frame and since it's on sale for $34.95 I decided to order one. I know it's technically for racing but I'll be using it for general flying and free style so the extra weight of 2206-2722kv motors is not a concern for me.

I still would prefer to use 4 separate ESCs but since this frame is designed for a 4-in-1 and I wanted to use 5S I went with the DYS F30a. It's rotated in the frame 90 degrees CCW so that the battery pads line up with the battery pads on the flight controller. The signal wire for motor 3 is on the pad for motor 1 of the FC, wire 1 is on pad 2, wire 4 is on pad 3 and wire 2 is on pad 4.

I've used the BetaFlight F3 flight controller on several builds and like it's features and layout so now that the BFF4 is available I used one for this quad. It's soft mounted with anti vibration standoffs to minimize vibrations reaching the gyro.

Since I'm not to concerned with weight and wanted to use 5S I chose the HyperLite V4 naked 2206-2722kv motors with HQ 5x4.3x3 props.

The rest of the electronics consist of an Eachine VTX03, LemonRX DSMX satellite and Runcam Swift Micro Swift 2 with the 2.3mm lens.

The stock camera plates were hitting the front of the 4-in-1 ESC which kept them from going into the holes in the bottom of the frame. Rather than file the plates I designed some camera mounts along with some motor vibration dampeners/ arm guards that are both printed in TPU. I also replaced the stock black standoffs with slightly shorter purple ones.

The AUW without a battery is 251 grams.