In order to mount the camera I 3D printed some arms to make it fit. I used black PLA.
See: Armattan Rooster micro camera adapter for RunCam (Swift 2 or Sparrow) by rapnit

Update - (8/26/2018):

• Hung up the quad on my wall until I get a nice day to fly it.

Update - (7/6/2018):

• Camera hooked up the flight controller.
• Receiver hooked up to the FC.
• Video Transmitter hooked up to the FC.
• Pigtail installed into back of quad.
• One motor to ESC attached.
• One ESC to FC attached.