F3 80mm Brushed
By italiangeis on Aug 28, 2016
39.5g without battery
F3 FC running at 8khz/2khz on Betaflight 2.9.1
In case anyone wants a full total, the motors for $14 on Amazon. The Efficiency 80 Series with FPV plate was $10.
I'm now running this on 2s. I dropped the voltage regulator and just run my Vtx and camera off the UART 5V output. The video is super clean and the speeds are incredible for brushed!
Photos
Part List
Frame |
Picnic Quads
Picnicquads.com
|
See Site |
Flight Controller |
Micro 32bits F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush For QX95 QX90 QX80
(3 builds)
Banggood.com
|
$10.99 |
Motors |
micro Multicopter Gear - UPGRADE for Hubsan H107C H107D 8.5mm x 20mm replacement Quadcopter Motor 4pc 0820
Amazon.com
|
See Site |
FPV Camera |
700TVL CMOS 1/4 CMOS FPV Camera 150 Degree Wide Angle NTSC PAL 3.3-5V
Banggood.com
|
$6.99 |
FPV Transmitter |
FX758-2 5.8G 200mW 32CH FPV Wireless Audio Video AV Transmitter Module
(12 builds)
Banggood.com
|
$6.71 |
Receiver |
Lemon Rx DSM2 Compatible Satellite Receiver
(3 builds)
Lemon-rx.com
|
$7.80 |
Batteries |
2 x Lipo 205mAh 3,7V 1S 25C/50C
(3 builds)
Mylipo.us
|
$12.00 |
Goggles |
Eachine VR-007 VR007 5.8G 40CH HD FPV Goggles Video Glasses 4.3 Inch With 7.4V 1600mAh Battery
Banggood.com
|
$49.99 |
Misc Parts |
Buzzer (5V / Φ9*6mm / Long Bi...)
(3 builds)
Myrcmart.com
|
$0.50 |
Nice little build. I see you're using that camera on this one as well. You must like it!