Basically besides Crossfire Its same as my Racequad setup Aether. LOL. it had so much power I figured heavier Frame would tone it down a bit for some freestyle. Probably will play with a 5040C Prop see how that feels too.
If you flash Butterflight or Betaflight U need to put TX1 onto RX3
SmartAudio and Cam Audio to TX4
Frame |
Rooster
(140 builds)
Armattanquads.com
|
$99.75 |
Flight Controller |
Raceflight Revolt V3 Flight Controller - Latest Version
(71 builds)
Racedayquads.com
|
$38.88 |
ESCs |
FlightOne Store
(46 builds)
Shop.raceflight.com
|
$19.95 |
Motors |
TMotor F40 PRO II - 2600KV
(10 builds)
Getfpv.com
|
$24.90 |
Propellers |
DALPROP T5046C Cyclone (2 CW 2 CCW)
(391 builds)
Pirofliprc.com
|
$2.99 |
FPV Camera |
RunCam Swift RR FPV Camera Rotor Riot Special Edition FOV 110 600TVL DC5-17V Wide Voltage IR Blocked CCD NTSC for Racing Drone Q
(5 builds)
Amazon.com
|
$44.99 |
FPV Transmitter |
TBS Unify Pro 5G8 V3 (SMA)
(197 builds)
Getfpv.com
|
See Site |
Antenna |
TBS Triumph 5.8GHz RHCP FPV Antenna Set (SMA Male)
(191 builds)
Getfpv.com
|
See Site |
Receiver |
TBS Crossfire Micro Receiver V2
(287 builds)
Getfpv.com
|
See Site |
Batteries |
Venom Graphene 90C 4S 1500mAh 14.8V Drone Racing LiPo Battery with UNI 2.0 Plug
Venompower.com
|
$20.99 |
HD Camera |
GoPro HERO5 Session
(303 builds)
Getfpv.com
|
$199.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hello,
Just saw your build. I noticed that you have the Rotor Riot Runcam swift. Does it mount alright without the 3 holes. I made the mistake of ordering that same camera. I was gonna return it since it doesn't have the 3 holes. Any advice?
Thanks
I would get one with three Holes... its fine but i would go get a Micro Eagle and add some spacers or 3d Print adapter. i had this cam laying around so i used it.
Thanks for the reply. Hey thats a fancy 1st picture you have up there. Looks cool. What's that in the background?
My tough box. Storm Case...
And with RR swift when tight it does not move. So really no worries . He has metal threads so yea