3 Inch custom inspired by Sky`s Zypher build (https://rotorbuilds.com/build/7434). I had an Asgard flying around and some Tornados - so I went ahead and drew up this thing. I wanted it to be a true X 3" and have a top mounted battery for that close to perfect COG. Buttersmooth with barely any tuning work done and not really any noticable propwash experienced so far. Drowned it on the 3rd battery with luckily no damage sustained.
Flight Controller |
FLIP32-F4-OMNIBUS AIO Asgard V5.1 (F4+ESC+OSD+SD+CS)
(9 builds)
Readytoflyquads.com
|
$75.99 |
Motors |
4 x Brotherhobby Tornado T1 1407 3600KV
(193 builds)
Getfpv.com
|
$63.96 |
FPV Camera |
RunCam Micro Swift 2 600TVL CCD FPV Camera (2.1mm or 2.3mm) - Orange
(282 builds)
Racedayquads.com
|
$22.95 |
FPV Transmitter |
ImmersionRC Tramp HV 5.8GHz Video Tx - (International Version)
(141 builds)
Getfpv.com
|
$29.99 |
Antenna |
MenaceRC Raptor Antenna 5.8Ghz Omni
(2 builds)
Nextfpv.com.au
|
See Site |
Receiver |
FrSky XM+ SBUS Mini Receiver
(1149 builds)
Getfpv.com
|
See Site |
Batteries |
FlexRC FPV Racing Drones | FPV Multicopter Store | Quadcopter Parts
(101 builds)
Flexrc.com
|
$52.50 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
would you sell the frame?
I am currently working on an improved version and might try out Armattan Productions to get it manufactured which would make it available to anyone interested as well. There will be a build on here with decent pictures once I get it done.