My second Rooster, very similar to my first that went swimming off some rocks at the beach. Great robust frame, reliable components. Shout out to phaserfpv.com.au for maintaining a bricks and motar store locally.
Frame |
Armattan Rooster Frame Kit
(140 builds)
Phaserfpv.com.au
|
See Site |
Flight Controller |
Matek F405-SE AIO F4 Flight Controller
(15 builds)
Phaserfpv.com.au
|
See Site |
ESCs |
Spedix GS35 4in1 BLHELI 32 Bit ESC
Phaserfpv.com.au
|
See Site |
Motors |
4 x ETHIX Mr Steele SILK Motor V2 (TBS)
(2 builds)
Phaserfpv.com.au
|
See Site |
Propellers |
HQ Prop 5X4.3X3V1S Propellers 1 Pack (4 Pieces)
(355 builds)
Phaserfpv.com.au
|
See Site |
FPV Camera |
Foxeer Predator Mini 5 Camera 4:3 16:9 1000TVL Super WDR PAL HS1251
(106 builds)
Phaserfpv.com.au
|
See Site |
FPV Transmitter |
TBS Unify Pro Race HV U.fl (SMA) (7 Pin)
(555 builds)
Phaserfpv.com.au
|
See Site |
Antenna |
TBS Triumph Stubby Orange Edition LHCP SMA
(5 builds)
Phaserfpv.com.au
|
See Site |
Receiver |
FrSky R-XSR 2.4GHz 16CH ACCST Micro Receiver w/ S-Bus & CPPM
(936 builds)
Phaserfpv.com.au
|
See Site |
Batteries |
Chinahobbyline CNHL G+PLUS 1300MAH 14.8V 4S 100C Lipo Battery [DG]
(13 builds)
Phaserfpv.com.au
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Fantastic build! What FC are you using? Do you have any pics during mid build? I'd like to see how you have the Spedix wired up.
matek ctr, ive got the speedix backwards so the power lead is in the correct side for the fc. ill post a few more pics once i get on the pc