First Smile ☺

By sergetania on May 04, 2018

3  194  0

The frame is very easy to build on, has lots of room and provides good protection.

No problems with the build, everything worked well. I have used an older version of HGLRC stack, F410. I didn't like the motor wires, everything else was of good quality. The drone weighs 71g without the battery.

Photos

Part List

Frame

usmile GP110 110mm Micro Brushless Carbon Fiber Quadcopter Frame Mini quad fpv racing quad similar with QAV-R QAV-X RX220 RX230 (2 builds)
Amazon.com
$15.48

Flight Controller

HGLRC 20x20mm Micro F4 Flight Controller AIO Betaflight OSD 5V BEC for XJB F425 F428 Series Flytower RC Drone (16 builds)
Banggood.com
$26.59

ESCs

20x20mm XJB BS13A 13A BLheli_S BB2 2-3S 4 In 1 Brushless ESC with Pins for F313 & F413 Flytower (3 builds)
Banggood.com
$30.00

Motors

4X Racerstar Racing Edition 1103 BR1103B 10000KV 1-3S Brushless Motor Black For 50 80 100 RC Drone FPV Racing (13 builds)
Banggood.com
$31.82

Propellers

Gemfan 2035BN 4 Blade - 2 Pairs - Blue (2 builds)
Rotorvillage.ca
$3.99

FPV Camera

Foxeer Arrow Micro FPV Camera Advanced OSD (6 builds)
Foxeer.com
$24.90

FPV Transmitter

Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter (426 builds)
Banggood.com
$12.22

Receiver

Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH for RC FPV Racing Drone (1368 builds)
Banggood.com
$13.69

Batteries

TATTU 650mAh 2S1P 75C 7.4V Lipo Battery Pack with XT30 plug (21 builds)
Getfpv.com
$7.99

Radio

FrSky X-Lite 2.4GHz Radio Controller (Red) (66 builds)
Getfpv.com
$121.99

Goggles

FatShark Dominator HDO FPV GogglesRechargeable 1800mah Pack (108 builds)
Racedayquads.com
$424.99

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (129 builds)
Pyrodrone.com
$149.99

Radio Module

Frsky R9M Lite - Radio Transmitter Module (Black) (11 builds)
Getfpv.com
$44.99

Soldering Iron

Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow) (25 builds)
Amazon.com
$104.95
Show stores (7)

Discussion

Sign in to comment

Guides & Reviews

29 2,578  33
30 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,988  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more