Goh-go SabotageRC Dingo 5"

By irmanhilmi on Jun 28, 2018

8  1,705  5

Wanted a lighter alternative to this build https://rotorbuilds.com/build/12301 so decided on the Dingo from from SaborageRC. Loving it so far, and is currently my go-to frame. Using OEM BLheli_S ESCs, can't find the link anywhere.

Created my own mounts for the VAS minion, available here https://www.thingiverse.com/thing:2981131
Heavy motor guards available here https://www.thingiverse.com/thing:2575502 and I use it on all my quads now. Print with 20-25% infill, and they'll be very light and give more than ample protection for crashes.

Photos

Part List

Frame

Dingo 5 (13 builds)
Sabotagerc.com
$38.00

Flight Controller

Matek F405-CTR 30x30 Flight Controller (33 builds)
Racedayquads.com
$39.99

Motors

4 x TBS MasterPilot PRO 2400kV (5 builds)
Team-blacksheep.com
$75.80

Propellers

HQ 5x4.3x3 V1S (2CW+2CCW) PC **Choose Color** (375 builds)
Pirofliprc.com
$3.69

FPV Camera

RunCam Micro Eagle 1/1.8" CMOS 800TVL Global WDR 16:9/4:3 Switchable FPV Camera for RC Drone (303 builds)
Banggood.com
$46.11

FPV Transmitter

TBS Unify Pro 5G8 V3 (SMA) (172 builds)
Getfpv.com
$39.99

Antenna

VAS Video Aerial Systems 5.8GHz RHCP Minion Antenna (u.FL/IPX connector) - Heli-Nation (4 builds)
Heli-nation.com
$14.95

Receiver

TBS Crossfire Nano RX (SE) - FPV Long Range Drone Receiver (337 builds)
Team-blacksheep.com
$29.95

Batteries

Giant Power DINOGY MEGA GRAPHENE 2.0 1550mAh 14.8V 75C Lipo Battery (4 builds)
Banggood.com
$31.50

Radio

FrSky ACCST Taranis Q X7 2.4GHz 16CH Mode 2 Transmitter Blue Orange for RC FPV Racing Drone (218 builds)
Banggood.com
$116.15

Goggles

Fat Shark Dominator V3 FPV Goggles (57 builds)
Getfpv.com
$299.99

HD Camera

GoPro HERO7 Black Action Camera (84 builds)
Getfpv.com
$399.99

HD Camera

GoPro HERO5 Session (267 builds)
Getfpv.com
$199.99

Video Receiver

FuriousFPV True-D V3.8 Diversity Receiver System - Clarity Redefined (17 builds)
Racedayquads.com
$55.99

Radio Module

TBS Crossfire Micro TX V2 (116 builds)
Team-blacksheep.com
$69.95

Battery Charger

ISDT Q6 Plus 300W 14A MINI Pocket Battery Balance Charger (57 builds)
Banggood.com
$59.99

Soldering Iron

Temperature Controlled Soldering Station Analog
Proskit.com
See Site

Backpack

Lowepro QuadGuard BP X1 Black/Grey (7 builds)
Amazon.com
$110.00
Show stores (9)

Discussion

Sign in to comment

dobled   Jul 12, 2018  

Great setup, you can post the link for case and stand for gopro session please

irmanhilmi   Jul 13, 2018 
dobled   Jul 13, 2018 

thank you very much

Currently   Jun 30, 2018  

Looks pretty tanky, noice!

irmanhilmi   Jun 30, 2018 

More importantly, it's waaaaaaay light.

Guides & Reviews

29 1,579  11
26 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
45 5,038  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more