Thor 210 Pink Edition

By Kuz on Jul 08, 2018

2  91  2

I've added a pod that I found on Thingiverse and modified for this frame. It fits decent, but I do get some prop strikes if the props get bent a little bit. Will add more pictures in the future or if they are requested.

Photos

Part List

Frame

THOR210 Loki X5 210mm (5mm base)
Rotorvillage.ca
$36.99

Flight Controller

Racerstar TattooF4S 30A BLHELI_32 4in1 ESC 5V BEC w/ F4 Flight Controller AIO OSD Current Sensor for RC Drone (11 builds)
Banggood.com
$74.99

Motors

4 x GRVDIGR 2205/2550KV Naked Bottoms (5 builds)
Grvdigr.com
$48.00

Propellers

HQ Durable Prop 5X4.8X3V1S (2CW+2CCW) - Upgraded (3 builds)
Rotorvillage.ca
$3.99

FPV Camera

RunCam Micro Swift 2 600TVL CCD FPV Camera (2.1mm or 2.3mm) - Orange (289 builds)
Racedayquads.com
$22.95

FPV Transmitter

AKK Nano 2 VTX with Smart Audio - 25/50/100/200mw (14 builds)
Racedayquads.com
$14.99

Antenna

Realacc UXII Stubby RHCP U.FL/IPEX IPX 5.8GHz 1.6dBi Mini FPV Antenna For TX RX Fatshark Goggles R (27 builds)
Banggood.com
$6.99

Receiver

Frsky XSR-E XSR-M D16 OPENTX 2.4G 16CH Dual Telemetry Mini Receiver SBUS CPPM Output (20 builds)
Banggood.com
$25.99

Batteries

TATTU R-Line 1550mAh 4s 95c Lipo Battery (81 builds)
Getfpv.com
$37.99

Radio

FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2) (42 builds)
Getfpv.com
$244.99

Goggles

Fat Shark Attitude V4 FPV Goggles Anniversary Edition (11 builds)
Getfpv.com
$349.99

HD Camera

GoPro Hero5 Session (196 builds)
Amazon.com
$299.99

Misc Parts

4 x Lumenier Digital RGB Arm LED Board (12 builds)
Getfpv.com
$11.96

Misc Parts

Lumenier Multi-functional RGB LED Tail Light (6 builds)
Getfpv.com
$16.99

Misc Parts

Rotor Village Medium Lipo Strap w/ Metal Loop (3 builds)
Rotorvillage.ca
$1.99

Video Receiver

Eachine PRO58 RX Diversity 40CH 5.8G OLED SCAN VRX FPV Receiver for FatShark Goggles (29 builds)
Banggood.com
$29.23

Radio Module

FrSky R9M Transmitter Module (69 builds)
Racedayquads.com
$34.99

Battery Charger

SkyRC D100 AC/DC Dual Balance Charger Discharger For RC Models
Banggood.com
$99.99

Battery Charger

Ultra Power - UP610 Touch DC Charger - 200W/10A
Rotorvillage.ca
$52.99

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (161 builds)
Banggood.com
$53.99
Show stores (6)

Discussion

Sign in to comment

Pirinaka   Mar 08, 2019  

Hello, any chance you have the STL for the modified canopy to share? I could not find it on thingiverse.

Kuz   Mar 13, 2019 

I haven't shared it on thingiverse. I'll see if i can get it up on my google drive later and post a link

Guides & Reviews

39 3,807  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,662  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more