Tiny Whoop style quadcopter with Blade Inductrix Plus flight controller. Tiny build with Anti-Turtle/Meow mode. The 3D printed canopy did add a bit of weight. Motor leads have to be reversed to work with this fc/motor combo. Has more than enough power and flies very nicely indoors.
3D Printed Parts
Frame |
65mm Micro Whoop Frame for 7x16mm Motors Version 3
(3 builds)
Betafpv.com
|
$1.50 |
Flight Controller |
Main Control Board: Inductrix FPV +
(BLH9601)
(2 builds)
Horizonhobby.com
|
$59.99 |
Motors |
BETAFPV 7x16mm 17500KV Brushed Motors with JST-1.25 Connector 2CW 2CCW for Micro Whoop Beta65S Frame or Eachine E011 etc
(2 builds)
Amazon.com
|
$13.99 |
Propellers |
Rakonheli 31mm 3 Blade Transparent Propeller (2CW+2CCW; 1.0mm Shaft)
(6 builds)
Rakonheli.com
|
$4.99 |
FPV Camera |
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
(23 builds)
Amazon.com
|
$21.98 |
Batteries |
6pcs GAONENG 260mAh HV 1S LiPo Battery 30C 3.8V LiHV for Tiny Whoop JST-PH 2.0 Powerwhoop mCPX Connector
(11 builds)
Amazon.com
|
$17.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for teckn0