- DIdn't realize that the micro fpv camera needs special mounting so had to hot glue it to the back place of the camera stand came with the frame
- considering upgrading to a swift 2 in the future
- something to note is that the EV100 googles has quite a small display but it can be improved by replacing the foam with a thinner one
- really recommend the 4 in 1 very beginner friendly as the soldering job is much easier than the individial ESC8
- one thing that also caused me some trouble was the props that i chose, i didnt take thickness into consideration when choosing props so i end up with really thick ones that the lock nut cant quite tighten up so i had to get low profile ones instead
- i put some hotglue onto the top plate to give the battery some extra grip when flying and crashing
Photos
New Message for IVRZ