Garuda from FalconMULTIROTORS
This 3D printed cutie is a 3D printed MONSTER with the ZMX motors. Easily my favorite quad.
FULL BUILD VIDEO
Frame |
Garuda 200
(24 builds)
Falconmultirotors.com
|
$69.00 |
Flight Controller |
KISS FC - 32bit Flight Controller
(4 builds)
Getpropsman.com
|
$2.49 |
ESCs |
4 x KISS ESC 24A RE (Race Edition) - 32bit
(4 builds)
Getpropsman.com
|
$9.96 |
Motors |
4 x ZMX V3 Motor 2206-2300KV (Blue cap)
Silver-drone.com
|
$114.04 |
Propellers |
RaceKraft 5 Inch Tri-Blade Propeller - Transparent 5040 (5x4x3)
Getpropsman.com
|
$2.79 |
FPV Camera |
Foxeer HS1177 IR Block FPV Camera
(58 builds)
Fpvheadquarters.com
|
$39.99 |
FPV Transmitter |
Hawkeye 200mw Race Band 32ch Video Transmitter
(62 builds)
Multirotormania.com
|
$35.00 |
Antenna |
Foxeer RHCP SMA Short Antenna - Choose your color
– MultiRotorMania
(30 builds)
Multirotormania.com
|
$8.99 |
Receiver |
FrSky XSR CPPM/S.Bus Receiver
(35 builds)
Fpvheadquarters.com
|
$14.99 |
HD Camera |
RunCam 2
(7 builds)
Shop.runcam.com
|
$99.00 |
FPV has had quite a journey. Just a few years ago we started racing drones around a track and doing flips over trees, but professional cinematic FPV is a more recent development. DJI has always owned the drone photography market, but smaller acrobatic drones are starting to enter the market. They have the advantage of close proximity flight indoors and around people. There's more artistic freedom and..
Read moreFor the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..
Read more
What PDB are you using?
Just a generic PDB w/ 5v and 12v outputs, possibly a Matek.
Cheers!