SOURCE TWO Hybrid "Stretch ½"

By wklee.fpv on Oct 25, 2018

17  1,127  10

This frame is Hybrid "Stretch ½" - front half is stretch X and back half is true X. Combined stretch and true X = boosting straight line speed and quick response in sharp turn.

TBS SOURCE TWO project can be found at

3DPOWER SOURCE TWO project can be found at

CLRacing F7 Flight Controller
DALRC Rocket 45A 3-6S ESC
T-motor F60 PRO II 2700KV
Foxeer Predator Micro v3
TBS Crossfire Nano Rx


Part List

Flight Controller

CLRacing F7 Flight Controller PDB OSD AIO


DALRC Rocket 45A 3-6S Blheli_32 DSHOT1200 Ready 4 In 1 FPV Racing Brushless ESC 30.5x30.5mm


T-motor F60 PRO II 2700KV 4S Brushless Motor for RC Multirotor FPV Racing Drone (7 builds)


Gemfan 5.1x5.2x3 5152S Tri-Blade 3 Blade Propellers Props (Set of 4 - PINK) (2 builds)

FPV Camera

Foxeer Predator Micro v3 1000TVL 1.8mm 110 Degree M8 Lens Super WDR FPV Camera With OSD DC5V-40V Low Latency (129 builds)

FPV Transmitter

TBS UNIFY PRO 5G8 HV (SMA) (590 builds)


TBS Crossfire Immortal T Antenna (14 builds)


Foxeer 8DBi Echo Patch Antenna Feeder FPV Goggles RHCP Black (31 builds)


TBS Crossfire Nano Rx (Special Edition) (31 builds)


FrSky R9M 900MHz Long Range Transmitter Module (2 builds)

HD Camera

Runcam Split 2 HD FPV Camera + Wifi Module + GoPro Quality Lens (81 builds)

HD Camera

GoPro Hero5 Session (197 builds)

HD Camera

GoPro HERO5 Session (197 builds)

Misc Parts

3DPOWER Hybrid Stretch ½ Rear Arm for TBS SOURCE TWO V0.1

Misc Parts

3DPOWER Hybrid Stretch ½ Front Arm for TBS SOURCE TWO V0.1

Misc Parts

3DPOWER Axii Lollipop Antenna mount for TBS SOURCE TWO V0.1

Misc Parts

3DPOWER Fixed FPV Micro Camera Mount for TBS SOURCE TWO V0.1 FPV Freestyle Racing Quadcopter

Radio Module

TBS Crossfire Micro TX (102 builds)
Show stores (4)


Sign in to comment

Junnicutt   May 17, 2019  

It looks like you switched to a dual bottom plate? any reason? I'm guessing it's just and extra copy of the same bottom plate, right?

Philo777   Dec 21, 2018  

Hi are you recieving Crossfire Link Quality on your OSD? How did you wire up the F7 to get it to work? Mine is not working, I only get analog RSSI not even sure if it is accurate and battery voltage in my OSD but I can not get Link Quality from the nano Crossfire. Any advice thank you Andre

wklee.fpv   Dec 22, 2018 
Philo777   Dec 22, 2018 

Hi these videos are for Link Quality on the Taranis but I want it to show on my OSD

wklee.fpv   Dec 23, 2018 

Hi, did you read this

it explains how to display LQ on OSD.

rixx   Nov 28, 2018  

what's the wait on this? :)

Jodie Froster   Nov 02, 2018  

Who cut the frame for you?

wklee.fpv   Nov 02, 2018 


QuadConnect   Nov 01, 2018  

Very clean build, I love it.

wklee.fpv   Nov 01, 2018 


Guides & Reviews

28 2,368  33
26 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,926  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more