PUDA250

By StoneFPV on Nov 30, 2018

8  179  0

After i crashed my RMX250 build, i went back to my workbench and create a new, identical build. I salvage everything from my old one, rebuy the broken parts and assemble everything. On the photos the stubby antenna is missing (not delivered now) and these pictrues are taken before the maiden flight.

Here is an video of my nearly complete build :)

And here some flight footage

Photos

Part List

Frame

PUDA 250 250mm 5 Inch Carbon Fiber FPV Freestyle RC Drone Frame Kit 4mm Arm For DALPROP 5045
Banggood.com
$30.99

Flight Controller

Holybro Kakute F7 STM32F745 Flight Controller W/ OSD Barometer Current Sensor for RC Drone (9 builds)
Banggood.com
$45.00

ESCs

Holybro Tekko32 35A 4-in-1 BLHeli32 3-6s ESC (27 builds)
Getfpv.com
$55.99

Motors

4 x DYS Samguk Series Wu 2206 2400KV 2700KV 3-4S Brushless Motor CW for RC Drone FPV Racing (20 builds)
Banggood.com
$39.96

Propellers

2 Pair DALPROP T5045C Cyclone 5 Inch 3 Blade Propeller Clover Prop Black Red Orange Green (149 builds)
Banggood.com
$3.05

FPV Camera

RunCam Micro Swift 3 (2.1mm M12 Lens) (16 builds)
Pirofliprc.com
$36.99

FPV Transmitter

ImmersionRC Tramp HV 6-18V 5.8GHz 1mW to>600mW Video Transmitter internationale Version V2 (11 builds)
Banggood.com
$35.99

Antenna

Realacc RHCP Super mini UXII Stubby 5.8GHz 1.6dBi FPV Antenna For TX RX Fatshark Goggles RC Drone (21 builds)
Banggood.com
$5.99

Receiver

FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver 1.5g for RC Multirotor FPV Racing Drone (563 builds)
Banggood.com
$21.99

Batteries

Tattu LiPo Battery Pack 1550mAh 75C 4S 14.8V with XT60 Plug for RC Boat Heli Airplane UAV Drone FPV (36 builds)
Smile.amazon.com
$25.69

HD Camera

GoPro HERO5 Session (328 builds)
Getfpv.com
$199.99

Transmitter

FrSky 2.4G ACCST Taranis Q X7 16 Channels Transmitter Radio Controller White (30 builds)
Amazon.com
$124.39

Misc Parts

Ummagawd Remix GoPro Session Mount by jos310581 (2 builds)
Thingiverse.com
See Site

Misc Parts

Remix Ummagawd AXII stubby mount by Toratijger (2 builds)
Thingiverse.com
See Site
Show stores (6)

Discussion

Sign in to comment

Guides & Reviews

49 5,146  43
Jan 15, 2019

The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..

Read more
14 2,883 
Nov 16, 2018

Update! Happymodel has released a new V2 Frame which uses a more durable plastic. The Happymodel Mobula7 is one of those rare treats to hit the micro scene. Countless models hit the market every month, but this one just happens to check all the boxes. It's a 2S brushless micro with a 75mm motor stance. It's slightly larger than the more traditional 65mm brushed micros, but it's still quite small...

Read more