MY FRIEND WINKY IS A GOOD EXPERIENCE MANUFACTURER. HE HAS THOUGHT TO HOW TO ARRANGE ALL THE COMPONENTS INSIDE THIS GORGEOUS FRAME LM2 BAND EDITION FROM https://www.lmultirotors.it/. THE PROBLEM IS THAT THE HEIGHT OF 25 MM WAS NOT ALLOWED TO STAY A STACK OF 3 LEVELS, FOR WHICH THE MOST EASY CHOICE WAS TO USE IT IN THE PART OF THE TAIL. ANOTHER ENGINEER SOLUTION HAS BEEN TO CREATE A POCKET TO ACCOMMODATE THE RECEIVER AND DO IN THE MANNER TO BLOCK THE VTX CARD. THE VTX AND THE CAM WERE COVERED WITH CONFORMAL COATING, THE REST OF ASSEMBLY IS ENOUGH STANDARD AS THE FC AND ESC ARE A COMBO STACK, THIS KWAD FLIES LIKE A CHARM, I RECOMMEND YOU TRY OUT