CX2.5 HD

By wklee.fpv on Mar 28, 2019

7  806  5

Geprc Cygnet CX2 Frame
Geprc 20x20mm Stable Flytower (really nice flight controller. there is almost no soldering needed = super easy to build!!)
4 x HGLRC Flame HF1106 1106 6000KV
2 Pairs Emax AVAN Rush 2.5 Inch
TBS Crossfire Nano RX.
3D Printed parts by 3DPOWER

Photos

Discussion

Sign in to comment

andgiraldo   Apr 12, 2019  

Great build! How did you manage to install Crossfire (Nano RX) on that board? I recently bought a Cygnet 3, which has the same FC you used, but there are not available UARTS. Any help would be appreciated.

andgiraldo   May 11, 2019 

I‘m not sure I understand. Are you using your CRSF Module on SBUS? Thanks.

toto263   Apr 22, 2019  

How is the flight time with 3s 550mah? I want to build 2.5 inch quad, but I am not sure what motors are best for long flight time.
There are too many motors like 1106, 1206, 1304, 1404.

wklee.fpv   Apr 23, 2019 

it really depend on how you fly. for normal slow flying, 3-4 mins.

Guides & Reviews

27 2,279  31
25 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,893  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more